(01.2012) OM_BA_ORBIMAT_CA_01_EN
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0
| 53
ORBIMAT CA
| Operating instructions
OPERATION
To enter other information:
3. Press "Comment" button.
The comment field appears in the display.
Fig. 34: Comments
4. Highlight input field, enter text and save.
8.10.3
Working with external memory cards
Supported storage media:
•
CF cards
•
SD cards
•
MMC cards
•
Smart Media cards
•
Sony Memory Sticks
X
Ensure that the memory card has "FAT formatting".
Available functions:
•
Saving and reading procedures
•
Saving of logs and procedures for further processing externally with special external software (OrbiProg CA)
•
Backing up, restoring and updating system data. This system data is essentially the operating software itself, the
library of the available weld heads, the auto programming database and the various operating languages of the
software
Inserting external memory card
X
Push card into the appropriate slot of the card reader.
A diskette symbol appears in the bottom right-hand corner of the display.
Is there no diskette symbol?
1. Remove memory card from the slot.
2. Disengage card reader using the ejector, remove it from the housing and insert it again.
3. Insert memory card into the slot again.
Using external memory card
Use depends on the software version.
Machines supplied before May 2008 (software version lower than 0.2.00):
The external memory card must be "activated".
1. In the main menu, select "System settings" > "Program settings".
2. Select the "External card" option in the "Procedure space" field.
The diskette symbol at the bottom right appears red. The memory card is activated as the storage medium.
When writing and reading, the software no longer uses the internal memory, but will use the external memory card
instead.
Summary of Contents for ORBIMAT 165 CA
Page 78: ...orbitalum tools gmbh Notizen Notes ...
Page 79: ......