7-8
Section
Saving Data
70
2. Use the Up/Down Cursor Key to select English or Japanese as desired.
EXT|ĆLANGUAGEĆ
| ENGLISH
|
| SWITCH:
↑
,
↓
3. Press the WRITE Key. From now on, messages will be displayed in the lan-
guage selected.
(During save)
(Save completed)
EXT|ĆLANGUAGEĆ
|
| COMPLETE!
|
EXT|ĆLANGUAGEĆ
| PARAMETER
| SAVING
|
7-8
Saving Data
This procedure is used to save position data, parameters, and programs to flash
memory. It can only be used with the CS1W-MC221/421 and C200H-MC221
MC Units.
The various kinds of data that are saved using this operation are copied from the
flash memory to internal memory after a power-up or restart. This data in internal
memory is controlled during normal operation. In addition, position data or pa-
rameters that are changed using the teaching or monitoring operations are also
stored in internal memory.
This operation saves the data from internal memory to flash memory. Be sure to
use it when changing position data, parameters, etc.
Procedure
Use the following procedure to write data to flash memory.
1, 2, 3...
1. Select “7. DATA SAVE” from the EXTENSION mode menu.
EXT| ĆDATA SAVEĆ
|
| 0.ALL 2.PRG
| 1.PRM 3.DAT
2. Select the type of data.
In this example, “all data” is selected.
EXT| ĆDATA SAVEĆ
| OK?
ALL|
| YES / NO
Indicates selected data as follows:
ALL: All data
PRM: Parameters
PRG: Program
DAT: Position data
3. Press the YES Key.
When the operation has been completed, the following display will appear.
EXT| ĆDATA SAVEĆ
|
ALL| COMPLETE!
|
7
0
YES
