1-2
Section
System Configuration
5
The following example is for the CV500-MC421.
Used for trial
operation,
debugging,
teaching, etc.
⋅
Monitor (present position,
I/O signals)
⋅
Origin search
⋅
Jogging
⋅
Error reset
⋅
Teaching
⋅
Etc.
⋅
Editing G language
programs
⋅
Monitoring status
⋅
File control
⋅
Etc.
Power Supply Unit
Peripheral bus
Host Link
Dedicated Cables
for Driver
(see note 1)
24-V power supply for interface
External I/O
CCW limit input
CW limit input
Proximity input
Immediate stop input
General-purpose inputs: 4 pts
General-purpose outputs: 4 pts
24-V power sup-
ply for interface
For 4 axes
5 to 15-V
power
supply for
interface
Used for fine
positioning as
required during
teaching.
⋅
Axis
selection
⋅
Multiplication
factor
selection
Teaching Box
MC Unit
CPU Unit
Servodriver
SYSMAC
CV-series
PC
MPG
MPG:
1 channel
IBM PC/AT or compatible:
CX-Motion
IBM PC/AT or compatible:
SYSMAC Support Software
Battery for absolute
encoder data back-
up (2.8 to 4.5 V)
(see note 3)
Dedicated
Terminals
(see note 2)
Either an ab-
solute encod-
er or an incre-
mental encod-
er can be
used.
Dedicated Cables for
OMRON-made H, M or
U-series Servomotors
are available.
Used to set
data or for
G-language
programming.
Note
1. Dedicated Cables compatible with OMRON H, M, or U-series Servomotors
are available. The user can also provide their own cables.
2. A Dedicated Cable for connections to the Dedicated Terminals is available.
The user can also provide their own cable.
3. A data backup battery must be used when using an absolute encoder.
CV-series MC Unit
Connection
