4
Application Precautions
xiv
•
Disconnect the functional ground terminal when performing withstand voltage
tests.
•
Be sure to confirm that no adverse effect will occur in the equipment before
executing Jog, Origin Search, Error Resetting, or Deceleration Stop.
•
Be sure to confirm that no adverse effect will occur in the equipment before
changing the operation mode of the Teaching Box.
•
Be sure to confirm that no adverse effect will occur in the equipment before
changing the present value.
•
Be sure to confirm that no adverse effect will occur in the equipment before
changing the set value.
•
Be sure to confirm that the set parameter or data operates properly.
•
Be sure to confirm that no adverse effect will occur in the equipment before
executing the forced set/reset.
•
Be sure to rewrite the flash memory after changing the position data or param-
eters.
•
Do not turn OFF the power supply to the Unit while the flash memory is being
written. In the worst case, the flash memory may malfunction.
•
Be sure to confirm that system parameters operate properly.
•
Always turn OFF the power supply before mounting or dismounting Memory
Cassettes.
•
Do not attempt to disassemble, repair, or modify any Units.
•
Do not damage, pull on, apply excessive stresses to, place heavy objects on,
or pinch the cables.
•
Do not pull on cables when transporting the Units.
