8
Manual name
Cat. No.
Model
Application
Description
NJ/NX-series Motion
Control Instructions
Reference Manual
W508
NJ501-
□□□□
NJ301-
□□□□
Learning about the
specifications of the motion
control instructions that are
provided by OMRON.
Describes the motion control instructions.
When programming, use this manual
together with the
NJ-series CPU Unit
Hardware User's Manual
(Cat. No.
W500),
NJ/NX-series CPU Unit Software
User's Manual
(Cat. No. W501), and
NJ/NX-series CPU Unit Motion Control
User's Manual
(Cat. No. W507).
NJ/NX-series
Troubleshooting Manual
W503
NJ501-
□□□□
NJ301-
□□□□
Learning about the errors
that may be detected in an
NJ/NX-series Controller.
Describes concepts on managing errors
that may be detected in an NJ/NX-series
Controller and information on individual
errors.
Use this manual together with the
NJ-series CPU Unit Hardware User's
Manual
(Cat. No. W500) and
NJ/NX-series CPU Unit Software User's
Manual
(Cat. No. W501).
NX-series Safety Control
Units User’s Manual
Z930
NX-SL
□□□□
NX-SI
□□□□
NX-SO
□□□□
Learning how to use the
NX-series Safety Control
Units.
Describe the hardware, setup methods
and functions of the NX-series Safety
Control Units.
1S-series AC
Servomotors/Servo Drives
with Built-in EtherCAT
Communications User's
Manual
I586
R88D-1S
□-ECT
R88M-1
□
Learning detailed
specifications of a
1S-series Servo Drive.
Describes how to install and wire the
Servo Drive, set parameters needed to
operate the Servo Drive, and remedies to
be taken and inspection methods to be
used in case that problems occur.
Summary of Contents for R88D-1SNx-ECT Series
Page 17: ...17 2 Approach the drive from top to down 3 Tight the upper part 4 Tight the down part...
Page 38: ...38 6 Add the Emergency stop button 7 Add the Reset button 8 Edit I O Map variables...
Page 58: ...58 11 Results Wizard step 5 Save to EEPROM Finish...
Page 59: ...2016 0616 0616 I823 E1 01 Note Do not use this document to operate the Unit...