11
1. Servo system configuration and peripheral
products
1.1. Outline
The 1S-series AC Servo Drives with Built-in EtherCAT communications support 100-Mbps EtherCAT.
When you use the 1S-series Servo Drive with a Machine Automation Controller NJ/NX-series CPU Unit or
CJ1W-NC
□
8
□
EtherCAT-compatible Position Control Unit, you can construct a high-speed and
sophisticated positioning control system.
Also, you need only one communications cable to connect the Servo Drive and the Controller. Therefore,
you can realize a position control system easily with reduced wiring effort.
With auto tuning, adaptive filter, notch filter, and damping control, you can set up a system that provides
stable operation by suppressing vibration in low-rigidity machines.
The FSoE protocol, the technology for a safe communication layer supported by the 1S-series Servo
Drives, allows you to build the safety system that uses the STO function from the safety controller on the
EtherCAT network.
Additional Information
For additional information about 1S servo drive, please refer to 1S-series AC Servomotors and Servo
Drives User’s Manual (with Built-in EtherCAT Communications) (Cat. No. I586)
Summary of Contents for R88D-1SNx-ECT Series
Page 17: ...17 2 Approach the drive from top to down 3 Tight the upper part 4 Tight the down part...
Page 38: ...38 6 Add the Emergency stop button 7 Add the Reset button 8 Edit I O Map variables...
Page 58: ...58 11 Results Wizard step 5 Save to EEPROM Finish...
Page 59: ...2016 0616 0616 I823 E1 01 Note Do not use this document to operate the Unit...
