![background image](http://html1.mh-extra.com/html/omron/r88d-1snx-ect-series/r88d-1snx-ect-series_startup-manual_744171020.webp)
20
5.
Please remove the motor connector (CNC) from the drive:
6.
Please wire U, V, W of the motor
(stripped wires)
7.
Please screw the PE wire
of the main power to the drive.
8.
Please plug back above connectors to the drive. (Power and Motor)
9.
Please fixe the FG wire from the motor cable to the drive
Or
In case of using the shield clamp, please attach the cable to the clamp in order to
connect the shielded section.
10.
Please plug the encoder cable to the drive (CN2)
Additional Information
For further details about wiring method, please refer to 1S-series AC Servomotors and Servo Drives
User’s Manual (with Built-in EtherCAT Communications) (Cat. No. I586)
Summary of Contents for R88D-1SNx-ECT Series
Page 17: ...17 2 Approach the drive from top to down 3 Tight the upper part 4 Tight the down part...
Page 38: ...38 6 Add the Emergency stop button 7 Add the Reset button 8 Edit I O Map variables...
Page 58: ...58 11 Results Wizard step 5 Save to EEPROM Finish...
Page 59: ...2016 0616 0616 I823 E1 01 Note Do not use this document to operate the Unit...