![background image](http://html.mh-extra.com/html/iacdrive/i5300-series/i5300-series_user-manual_603796001.webp)
I5300 User Manual Preface
- 1 -
Preface
Thank you for purchasing the I5300 series AC drive.
The I5300 series AC drive is a general-purpose high-performance current vector control
AC drive. It is an upgrade product based on I5000 and can implement the control of
asynchronous motor and permanent magnet synchronous motor (PMSM). It increases the
user programmable function, background monitoring software and communication bus
function, and supports multi-kind PG cards. It is used to drive various automation production
equipment involving textile, paper-making, wiredrawing, machine tool, packing, food, fan
and pump.
This manual describes the correct use of the I5300 series AC drive, including selection,
parameter setting, commissioning, maintenance & inspection. Read and understand the
manual before use and forward the manual to the end user.
Notes
•
The drawings in the manual are sometimes shown without covers or protective guards.
Remember to install the covers or protective guards as speci
fi
ed
fi
rst, and then perform
operations in accordance with the instructions.
•
The drawings in the manual are shown for description only and may not match the product
you purchased.
•
The instructions are subject to change, without notice, due to product upgrade, speci
fi
cation
modi
fi
cation as well as efforts to increase the accuracy and convenience of the manual.
•
Contact our agents or customer service center if you have problems during the use.
Summary of Contents for I5300 Series
