QUICK SETUP INSTRUCTIONS
FOR VARIABLE SPEED DRIVE
1 PHASE TO 3 PHASE
AND
3 PHASE TO 3 PHASE
Connect Live to R and Neutral to S for single phase input
supply
Connections U/T1, V/T2, W/T3 go to the motor
Connect 3 phase input supply to L1/R, L2/S, L3/T
Connections U/T1, V/T2, W/T3 go to the motor
V/F curve set up
Factory setting is General purpose
HAMILTON PH: 07 847 3374
CHRISTCHURCH PH: 03 666 3374
[email protected]
AUCKLAND PH: 09 271 6063
[email protected]
For remote stop and start connect between DCM
and MI1 (FWD) and MI2 (REV) (DCM is your common)
For remote Potentiometer connect the pot to +10V,
AVI and ACM (common).
Set
00.20
to 2 (Remote Potentiometer)
Set
00.21
to 1 (Remote ON/OFF setting)
Set
02.00
to 1 or 2 (2-wire operation control)
Instructions for Remote Setup
(Remote On/Off and Speed Variation)
Set 02.00 to 3 (3-wire operation control)
VFD-ME300 Series
