![background image](http://html1.mh-extra.com/html/omron/r88d-1snx-ect-series/r88d-1snx-ect-series_startup-manual_744171012.webp)
12
1.2. Servo System constructed in this guide
This 1S-series Sysmac AC Servo Drives Startup Guide (hereafter referred to as “this Guide”) contains
instructions from assembling the hardware that makes up the Servo system to performing debugging on
the system. This Guide builds the Servo system in the following steps
1
Installation and wiring
▼
2
System Configuration with NJ and NX safety controller
▼
3
Sysmac Studio project creation and sizing file import
▼
4
Motor, ABS encoder, I/O Setup
▼
5
Easy tuning for gain adjustment
▼
6
FSoE STO Activation
Additional Information
For additional information on how to setup the motion, please refer to the start-up guide for motion
control (W514-E1-01).
Summary of Contents for R88D-1SNx-ECT Series
Page 17: ...17 2 Approach the drive from top to down 3 Tight the upper part 4 Tight the down part...
Page 38: ...38 6 Add the Emergency stop button 7 Add the Reset button 8 Edit I O Map variables...
Page 58: ...58 11 Results Wizard step 5 Save to EEPROM Finish...
Page 59: ...2016 0616 0616 I823 E1 01 Note Do not use this document to operate the Unit...