![background image](http://html1.mh-extra.com/html/omron/r88d-1snx-ect-series/r88d-1snx-ect-series_startup-manual_744171013.webp)
13
1.3. System configuration
The following figure shows the system configuration and devices that are used in this Guide.
The system configuration is shown in the following figure.
•
Configuration devices
The models of the devices that are described in this Guide are given in the following table. When selecting
devices for an actual application, refer to the device manuals.
Device name
Model
Manual name
NJ-series CPU Unit
NJ501-[]
NJ-series CPU Unit Hardware
User’s Manual (Cat. No. W500)
NJ-series Power Supply
NJ-P[]3001
NX-series EtherCAT Coupler
NX-ECC[]
NX-series EtherCAT Coupler Unit
User’s Manual (Cat. No. W519)
NX-series Safety control unit
NX-SL3300
NX safety CPU unit Hardware
User’s Manual (Cat. No. Z930)
NX I/0 Series
NX-SID[]
NX-SOD[]
Ethernet/EtherCAT
communications cables
XS5W-T[]
-
AC Servo Drives
R88D-1SN[]
1S-series AC Servomotors and
Servo Drives User’s Manual (with
Built-in EtherCAT
Communications) (Cat. No. I586)
AC Servo Motors
R88M-1[]
Power cables
R88A-CA[]
Encoder Cables
R88A-CR[]
Summary of Contents for R88D-1SNx-ECT Series
Page 17: ...17 2 Approach the drive from top to down 3 Tight the upper part 4 Tight the down part...
Page 38: ...38 6 Add the Emergency stop button 7 Add the Reset button 8 Edit I O Map variables...
Page 58: ...58 11 Results Wizard step 5 Save to EEPROM Finish...
Page 59: ...2016 0616 0616 I823 E1 01 Note Do not use this document to operate the Unit...