29
3.4 Motor, ABS Encoder and I/O Setup
■ Quick setup wizard
1.
Please right click to the drive and select “setup and tuning”
2.
Select quick setup
3.
This setting is related with Encoder usage and I/O pre-configuration
When using I/O features of the drive in the motion control (MC) function module of
Sysmac Controller, recommended settings should be used. (Related inputs: IN2: POT,
IN3: NOT, IN4: DEC, IN7: EXT1, IN8: EXT2, Absolute encoder usage: “Use as absolute
encoder but ignore multi-rotation counter overflow”).
4.
Absolute encoder usage
1S motor has an absolute encoder for all models. But it can be used as incremental if
needed. When using Sysmac Controller, it is recommended to keep the default value. (as
described in previous step 3)
Summary of Contents for R88D-1SNx-ECT Series
Page 17: ...17 2 Approach the drive from top to down 3 Tight the upper part 4 Tight the down part...
Page 38: ...38 6 Add the Emergency stop button 7 Add the Reset button 8 Edit I O Map variables...
Page 58: ...58 11 Results Wizard step 5 Save to EEPROM Finish...
Page 59: ...2016 0616 0616 I823 E1 01 Note Do not use this document to operate the Unit...
