Omron NX-SL series Instruction & Reference Manual Download Page 22

Page: 22 / 270

Unit Versions

NX-series Safety Control Unit Instructions Reference Manual (Z931)

The following information is provided in the notched area on the Unit.

You can use the Unit Production Information on the Sysmac Studio to check the unit versions EtherCAT
Coupler Unit and NX Units.

Double-click

EtherCAT

under

Configurations and Setup

in the Multiview Explorer, and then

double-click the EtherCAT Coupler Unit. Or, right-click the EtherCAT Coupler Unit and select

Edit

from the menu.

The Edit Slave Terminal Configuration Tab Page is displayed.

You can also display the Edit Slave Terminal Configuration Tab Page with any of the following
operations.

Double-click

EtherCAT

under

Configurations and Setup

in the Multiview Explorer, right-click

the EtherCAT Coupler Unit in the EtherCAT Configuration Edit Tab Page, and select

Edit Slave

Terminal Configuration

Or, select the EtherCAT Coupler Unit on the EtherCAT Configuration Edit Tab Page click the

Edit Slave Terminal Configuration

Button.

Go online.

Right-click the EtherCAT Coupler Unit and select

Display Production Information

from the

menu.

The Production Information Dialog Box is displayed.

In this example, “Ver.1.0” is displayed next to the Unit model.

The following items are displayed.
• Slot number
• Unit model number
• Unit version
• Serial number
• Lot number

Name

Function

Lot number and
unit version

Gives the lot number and unit version of the Unit.
• DDMYY



: Lot number,



: Used by OMRON.

“M” gives the month (1 to 9: January to September, X: October, Y: November, Z: December)

• 1



: Unit version

The decimal portion of the unit version is omitted. (It is provided in the Unit specifications.)

Confirming Unit Versions with the Sysmac Studio

Simple Display

Detailed Display

Summary of Contents for NX-SL series















































































































































































































































































Search results

Summary of Contents for NX-SL series

Reviews:

Related manuals for NX-SL series

Brands by name

Popular brands

Omron NX-SL series, Instruction & Reference Manual

Search results

Summary of Contents for NX-SL series

Reviews:

Related manuals for NX-SL series

Brands by name

Popular brands