manualshive.com logo in svg

Omron NS10-TV Series, Programming Manual

Share
Download
Omron NS10-TV Series Programming Manual Download Page 609

Section 5 Troubleshooting and Maintenance 

5-1 Errors 

5-2 

NS Series Programming Manual 

Errors at PT Startup

 

Symptoms Cause 

Possible countermeasure 

Power not supplied to the 
PT.

 

Check the connections and supply power correctly to the PT. 

 

(Refer to 

3-1 Installing the PT 

in the 

NS Series Setup Man-

ual

.) 

 

Power supply fuse  
broken.

 

The PT must be repaired. Contact your nearest OMRON 
representative. 

 

Indicators are not 
lit. 

 

System program  
corrupted. (Fatal error.)

 

The PT must be repaired. Contact your nearest OMRON 
representative. 

 

System program  
corrupted. (Fatal error.)

 

The PT must be repaired. Contact your nearest OMRON 
representative. 

 

Indicator remains 
orange and screen 
is empty.

 

Cannot check Memory 
Card.

 

Use an OMRON specified Memory Card. 

 

(Refer to 

3-6 Using Memory Cards 

in the

 NS Series Setup 

Manual

.) 

 

Indicators flash 
green and buzzer 
alternates ON and 
OFF. 

 

Backlight failure. 

 

Replace the backlight. 

 

Contact your nearest OMRON representative. 

 

Screen is empty 
and indicators 
flash green. 

 

Automatic upload/ 
download has ended  
normally. 

 

This is not an error. To return to normal operation, set all DIP 
switches to OFF and cycle the PT power. 

 

The system program is 
corrupted (non-fatal er-
ror). The combination of 
NS-series PT hardware 
and system program ver-
sion is incorrect. 

Recovery/update the system program. (Refer to 

3-6 Using 

Memory Cards in the NS Series Setup Manual 

(Cat. No. 

V083).) 
Contact your nearest OMRON representative if the same 
problem occurs after recovering/updating the system pro-
gram. 

The indicator is lit 
green and the 
screen is blank.  

In the following cases, 
project data was 
downloaded without 
clearing the log data 
saved in the NS.  
• A project was 
downloaded to the 
NS-series PT in which 
settings  
related to history, such as 
alarm/ event or data log 
settings, have been 
changed. 
• An attempt was made to 
download a project that 
was different from the 
project saved in the NS. 

Download the project data again. When downloading the 
project data again, be sure to clear the log data saved in the 
NS. 

The screen is 
blank and the in-
dicator is flashing 
red.  

Automatic up-
load/download has ended 
abnormally.  

The system program may be corrupted. Reinstall the system 
program.  
(Refer to 

3-6 Using Memory Cards in the NS Series Setup 

Manual 

(Cat. No. V083).) 

If the same problem occurs after reinstalling the system pro-
gram, the PT may be faulty. Contact your nearest  
OMRON representative. 
An attempt may have been made to transfer screens that are 
larger than the memory of the PT. Check the screen data at 
the transfer destination. 

The indicator is lit 
red and the screen 
is blank. 

The PT is faulty,  
or the system  
program is  
corrupted. 

Reinstall the system program. (Refer to 

3-6 Using Memory 

Cards in the NS Series Setup Manual 

(Cat. No. V083).) 

If the same problem occurs after reinstalling the system pro-
gram, the PT may be faulty. Contact your nearest  
OMRON representative. 

Summary of Contents for NS10-TV Series











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands