Functions and Oper
ations
5.34 Limiting Key Operations
5-85
●
Max/Min Protect
The following parameter limits key operations for switching and
resetting maximum and minimum values.
Parameter Setting Procedure
Parameter
Set value
Max./min.
value
switching
Reset
Max/Min protect
mm.pt
0
Enabled
Enabled
1
Enabled
Prohibited
2
Prohibited
Prohibited
3 s min.
A
Press the
L
[LEVEL] and
M
[MODE] Keys together for at least
3 s in RUN level to move to the protect level.
• “
L
p
” is displayed on the level/bank display to indicate protect
level.
B
Press the
M
[MODE] Key several times to display the desired
protection.
• The display shows setting change protect as an example.
C
Press the
S
[SHIFT] Key to make the SV display flash.
D
Use the
U
[UP] Key to change the SV display.
E
Press the
M
[MODE] Key to switch to the next parameter.
• The set value is registered.
1 s min.
F
Press the
L
[LEVEL] and
M
[MODE] Keys together for at least
1 s to return to RUN level.
run.
pt
Displays “L
p
.”
0
L
p
M
L
wt.
pt
off
L
p
M
wt.
pt
off
L
p
S
wt.
pt
on
L
p
U
mm.pt
0
L
p
M
123.
4
123.
4
M
L
Summary of Contents for K35-2
