Omron K35-2, User Manual

Page: 133 / 186

Functions and Oper
ations
5.27 Using the Position Meter
5-71
5.27 Using the Position Meter
The meter on the right side of the front panel with 20 sections is called
the “position meter” and shows the position of the displayed value
(present value, maximum, or minimum) in relation to any values set
using the position meter upper and lower limits. The position meter
upper and lower limits can be set to any range.
The position meter display pattern is set using the following parameter.
*1. The decimal point depends on the “decimal point position”
parameter setting.
With the K3HB-P, the setting range is 0 to 99999.
*2. The amount that the displayed value differs from the mid-point
between the position meter upper and lower limits (the deviation) is
displayed.
* If the position meter lower limit set value is larger than the position
meter upper limit set value, the top and bottom of the above displays
will be reversed.
* The position meter will not be lit if there is an input error.
Display adjustment level
Parameter Set value Meaning of set value
Position meter type
pos-t
off
OFF
inc
Incremental
inc-r
Incremental (reversed)
dev
Deviation (*2)
dev-r
Deviation (reversed)
Position meter upper limit
pos-h
- 19999
to
99999
−
19999 to 99999 (*1)
Position meter lower limit
pos-l
- 19999
to
99999
−
19999 to 99999 (*1)
Position meter
type
Incremental
Incremental
(reversed)
Deviation
Deviation
(reversed)
Position meter
upper limit
(set to 100)
Position meter
lower limit
(set to 0)
R P C
pos-t
L
2
(POS-T)
pos-h
L
2
(POS-H)
pos-l
L
2
(POS-L)
Present value: 70
Decrease
Increase
Present v
alue
Present value: 70
Decrease
Increase
Present v
alue
Decrease
Increase
Present v
alue
Present value: 85 Present value: 85
Decrease
Increase
Present v
alue