Omron K35-2, User Manual

Page: 136 / 186

Functions and Oper
ations
Section 5 Functions and Operations
5-74
5.29 Performing Output Tests
The output test function is used to set test measurement values using
the keys to check the comparative outputs against the set comparative
set values.
A test measurement value is set using the following parameter.
Note: With the K3HB-P, the setting range is 0 to 99999.
Parameter Setting Procedure
Output test level
Parameter Set value Meaning of set value
Test input
test
off
Output test disabled
- 19999
to
99999
−
19999 to 99999 (See note.)
R P C
test
L
t
(TEST)
3 s min.
A Press the
L
[LEVEL] Key for at least 3 s in RUN level to move to
the initial setting level.
• “
L
0
” is displayed on the level/bank display to indicate the initial
setting level.
B Press the
L
[LEVEL] Key several times to move to the output
test level “
test
.”
• “
L
t
” is displayed on the level/bank display to indicate the output
test level.
C Press the
S
[SHIFT] Key.
• The test input will be 0 after moving to output test status.
D Use the
U
[UP] and
S
[SHIFT] Keys to change the set value.
• Use the
U
[UP] Key to increase the set value.
• Use the
S
[SHIFT] Key to decrease the set value.
• Continue pressing the key to quickly increase or decrease the
set value.
1 s min.
E Once the output test has finished, press the
L
[LEVEL] Key for
at least 1 s to return to RUN level.
Displays “L
0
.”
L
0
L
test
off
Displays “L
t
.”
L
t
L
test
0
L
t
S
test
1234
L
t
U
123. 4
123. 4
L