![background image](http://html.mh-extra.com/html/omron/k35-2/k35-2_user-manual_743339107.webp)
Functions and Oper
ations
5.12 Outputting for a Set Interval
5-45
Parameter Setting Procedure
Important
Set the shot output time (
shot
) to “0” to use the OFF delay (
off-d
).
If set to anything else,
off-d
(OFF delay) will be disabled.
"5.13 Delaying Output OFF Timing"
→
3 s min.
A
Press the
L
[LEVEL] Key for at least 3 s in RUN level to move to
the initial setting level.
• “
L
0
” is displayed on the level/bank display to indicate the initial
setting level.
B
Press the
M
[MODE] Key several times to change the PV display
to “
amov
.”
• This parameter is not displayed for the initial status due to setting
level protect.
Refer to "5.34 Limiting Key Operations" (P.5-84) for information
on removing setting level protect.
C
Press the
S
[SHIFT] Key to make the SV display flash.
• The setting can be changed when the SV display starts to
flash.
D
Use the
U
[UP] and
S
[SHIFT] Keys to set the password “
-
0169
.” Press the
M
[MODE] Key to move to the advanced
function setting level.
• “
L
f
” is displayed on the level/bank display to indicate the
advanced function setting level.
E
Press the
M
[MODE] Key several times to change the PV display
to “
shot
.”
F
Press the
S
[SHIFT] Key to make the SV display flash.
• The setting can be changed when the SV display starts to
flash.
G
Use the
U
[UP] and
S
[SHIFT] Keys to change the set value.
Displays “L
0
.”
L
0
L
amov
0
L
0
M
amov
00000
L
0
S
init
Displays “L
f
.”
off
L
f
U
M
shot
0
L
f
M
shot
0000
L
f
S
shot
0010
L
f
U
H
Press the
M
[MODE] Key to switch to the next parameter.
• The set value is registered.
1 s min.
I
Press the
L
[LEVEL] Key for at least 1 s to return to the initial
setting level.
1 s min.
J
Press the
L
[LEVEL] Key for at least 1 s to return to RUN level.
out-n
n-o
L
f
M
L
0
L
123.
4
123.
4
L
Remarks
Summary of Contents for K35-2
