Omron K35-2, User Manual

Page: 131 / 186

Functions and Oper
ations
5.26 Changing Display Colors
5-69
5.26 Changing Display Colors
The PV display color can be switched when the comparative result
changes from PASS to HH, H, L, or LL, or when an input error occurs
during operation in RUN, adjustment, or protect levels.
This function is called “display color selection.” The color switching
pattern is set using the following parameter.
* Comparative output HH, H, L, or LL or input error status
K3HB-R/P:
OFF: All comparative outputs HH, H, L, and LL are OFF and no input error.
ON: HH, H, L, or LL comparative output is ON or input error.
K3HB-C:
OFF: All outputs 1 to 5 are OFF and no input error.
ON: One of outputs 1 to 5 is ON or input error.
Parameter Setting Procedure
Display adjustment level
Parameter Set value Status*
PV display
color
Display color selection
color
grn-r
OFF Green
ON Red
grn
OFF
Green
ON
red-g
OFF Red
ON Green
red
OFF
Red
ON
R P C
color
L
2
(COLOR)
3 s min.
A Press the
L
[LEVEL] Key for at least 3 s in RUN level to move to
the initial setting level.
• “
L
0
” is displayed on the level/bank display to indicate the initial
setting level.
B Press the
L
[LEVEL] Key several times to move to the display
adjustment level.
• “
L
2
” is displayed on the level/bank display to indicate the
display adjustment level.
C Press the
M
[MODE] Key to change the PV display to “
color
.”
D Press the
S
[SHIFT] Key to make the SV display flash.
• The setting can be changed when the SV display starts to
flash.
E Use the
U
[UP] Key to change the set value.
Displays “L
0
.”
L
0
L
sv. dsp
off
Displays “L
2
."
L
2
L
color
grn-r
L
2
M
color
grn-r
L
2
S
color
red-g
L
2
U