Omron K35-2, User Manual

Page: 135 / 186

Functions and Oper
ations
5.28 Automatic Return to Normal Display
5-73
5.28 Automatic Return to Normal Display
If no keys operations are performed for a specified time in the RUN
level or adjustment level, the display will automatically return to the
display status activated when the power was turned ON. The time until
the display returns automatically can be set and the automatic display
return can be disabled through this setting.
Automatic display return settings are made using the following
parameter.
Parameter Setting Procedure
Display adjustment level
Parameter Set value Meaning of set value
Automatic display return
ret
0
to
99
0 to 99 s
Automatic display return will
not occur if set to 0.
R P C
ret
L
2
(RET)
3 s min.
A Press the
L
[LEVEL] Key for at least 3 s in RUN level to move to
the initial setting level.
• “
L
0
” is displayed on the level/bank display to indicate the initial
setting level.
B Press the
L
[LEVEL] Key several times to move to the display
adjustment level.
• “
L
2
” is displayed on the level/bank display to indicate the
display adjustment level.
C Press the
M
[MODE] Key several times to change the PV display
to “
ret
.”
D Press the
S
[SHIFT] Key to make the SV display flash.
• The setting can be changed when the SV display starts to
flash.
E Use the
U
[UP] and
S
[SHIFT] Keys to change the set value.
F Press the
M
[MODE] Key to switch to the next parameter.
• The set value is registered.
1 s min.
G Press the
L
[LEVEL] Key for at least 1 s to return to RUN level.
Displays “L
0
.”
L
0
L
Displays “L
2
."
L
2
sv. dsp
off
L
ret
10
L
2
M
ret
10
L
2
S
03
L
2
ret
U
pos-t
inc
L
2
M
123. 4
123. 4
L