- 27 -
8.5
External indicator output
<F3SN, F3SH F3ZN>
This is a non-safety related output which can be connected to an
optional indicator, such as F39-A01P - .
Applicable only to the models which can be connected in series.
This can be selected to the following output;
1. Dark ON
2. Light ON
3. Light diagnosis
4. Lockout
5. Test input-ON
6. Test input-OFF
7. Blanking setting
For detail of each output, please refer to ANNEX1 INDEX.
<Lighting pattern setup>
Display
Lighting pattern setup
LIHt Light
bln.1
It blinks in a cycle of 0.5 seconds.
bln.2
It blinks in a cycle of 1 seconds.
bln.3
It blinks in a cycle of 2 seconds.
<Note>
1.
F3ZN can set up only 1-4.
2.
There are some which cannot set up above 5-7 by the serial
number about F3SN and F3SH.
3.
There are some which cannot set up a blink pattern by the serial
number. (Light only)
4. Because F3SH does not have fixed blanking function, “7.
Blanking setting” is not selectable.
- 28 -
<F3SN, F3SH>
⑤－１
①
Setting completed
Error
Send to sensor
②－４
Lockout
②－３
Light diagnosis
②－２
Light ON
②－１
Dark ON
Blinking
[Cancel] Key
[Enter] Key
[Up][Down] Key
Go to
①
after 1 sec.
1.D.ON
2.L.ON
3.L.DG
4.L.OU
SEND
⑤－２
GOOD
ERR
Ext. indicator output
4.E.I.O.
②－６
②－５
Test input-ON
Test input-OFF
7.b.L.S
6.t.OF
5.t.on
④-1
Lighting pattern setup
LIHt
bLn.1
bLn.2
bLn.3
②－７
Blanking setting
③
Lighting pattern setup
FLSH
