Omron F39-MC11, Instruction Manual

Page: 33 / 35

- 57 -
Lock object All / Only F3SN+F3SH / Only
F3ZN / Clear – Setting lock
Input password Input 4 digit number
Old password Input 4 digit number – Change password
New password Input 4 digit number
No. of fixed
zones Clear, 0 to 3
Max. no. of Fixed
beams Clear, 1 to 9
PROTECT
– Setting limitation
Max. no. of
floating beams Clear, 0 to 3
Note1: There are some which cannot be set up by the serial number.
See Group A of “1.2 Available function and Sensor serial number” (Page 3 )
Note2: There are some which cannot be set up by the serial number.
See Group B of “1.2 Available function and Sensor serial number” (Page 3 )
- 58 -
F3SH
Function
Sensor
CH
Mode display
(Top row)
Mode display
(Bottom row)
Setting value L-on / D-on / Light diagnosis /
Lockout / Outermost beam /
Specified beam Auxiliary output
- Send to sensor
Setting value L-on / D-on / Light diagnosis /
Lockout / Test input-ON /
Test input-OFF / Blanking
setting
Lighting pattern setup
(Note1) Light / Blink in a cycle of 0.5
seconds / Blink in a cycle of
1 seconds / Blink in a cycle
of 2 seconds
External indicator
output
- Send to sensor
Function Valid / Invalid
Setting time 100 to 600ms; every 5ms
External device
monitoring
- Send to sensor
Function Valid / Invalid Start interlock
- Send to sensor
Function Valid / Invalid Restart interlock
- Send to sensor
Initialization Cancel / Send to sensor
Setting value 0000 to 9999
ALL
ID setting
- Send to sensor
Receiving light level
value view Receiving light level value
Adjusting threshold ON-threshold
1 to 3 Threshold teach
(Note 2)
- Send to sensor
SET /
MONITOR
1 to 3 Error log view Error log view Error code
1 to 3 Upload Bank number
1 to 3 Download Bank number
COPY
– Bank lock Bank number LOCK / FREE
Lock object All / Only F3SN+F3SH /
Only F3ZN / Clear – Setting lock
Input password Input 4 digit number
Old password Input 4 digit number – Change password
New password Input 4 digit number
No. of fixed zones Clear, 0 to 3
Max. no. of Fixed
beams Clear, 1 to 9
PROTECT
– Setting limitation
Max. no. of floating
beams Clear, 0 to 3
Note1: There are some which cannot be set up by the serial number.
See Group A of “1.2 Available function and Sensor serial number” (Page 3 )
Note2: There are some which cannot be set up by the serial number.
See Group B of “1.2 Available function and Sensor serial number” (Page 3 )