- 13 -
Changing selected channel
when connected to three sensors
+
|
CH(+)
CH(-)
+
|
CH(+)
CH(-)
+
|
CH(+)
CH(-)
1ch is selected
(After power on)
2ch is selected
3ch is selected
1ch is selected
The indicator will be displayed as illustrated below, depending on which
function is to be set. This indicates that a setting item is to be
proceeded to all the sensors.
CAUTION
If the channel is changed while making a setting, content of the setting
will be cancelled.
- 14 -
8 MONITOR/SET
CAUTION
After the changing the setting of the sensor, a start-up check must
be conducted. Normal operation can only be allowed after safety is
confirmed.
A change of the setting can only be done under observance of laws/
standards which are related to safe operation of the product.
This function enables the monitoring of current set values and functions
of the sensor. When a set value is changed, content of the change is
reflected on sensor. The value which is indicated first in each category
is the current set value.
The method of change into each mode is as illustrated below.
By pressing [ENTER] key when the selected function is displayed,
editing of selected function becomes possible.
(i)F3SN
1.Fixed blanking
2.Floating blanking
4.Ext. indicator output
3.Auxiliary output
5.Ext. device monitor
9.initialize
0.ID
7.Restart interlock
6.Start interlock
1.FIX
2.FLO
3.AUX
4.E.I.O.
5.EDM
6.SIL
7.RIL
9.INI
0.ID
[UP][DOWN]Key
Blinking
A.Threshold teach
A.TCH
B.Error log view
B.LOG
