- 39 -
3. Writing ON-threshold level into sensor.
ON threshold level obtained by calculation is written in a sensor.
When the writing is failed, check connecting condition between the
sensor and the F39-MC11 and start from the first.
A.TCH SEND
Threshold write
(1)
Go to 1. display for receiving
light level value No. (2)-1.
ENTER
A.TCH Good
Threshold write
A.TCH ERR
Threshold write
Write-in success
Write-in failure
After 1
second.
Go to 1. display
for receiving light
level value No.
(1).
- 40 -
8.13 Error log view
<F3SN, F3SH, F3ZN>
The error log recorded in sensor is displayed.
The error log is written with error codes. See
the contents of error code
at
“
ANNEX3 ERROR CODE LIST
”
(Page 60 ) for detailed information.
The error code having smaller error number is newer error.
d1.35
Error Log View
Error Log View
b.Log
(1)
CH
U/
D
Error Log View
d2.21
L/R
Change emitter / receiver
Change sensor channel
(2)
(3)
(5)
(4)
Error Log View
Error Log View
L1.61
d1.21
Change Error number
L/R
U/
D
ENTER Key
CANCEL Key
[L]/[R] Key
[UP]/[DOWN] Key
CH
CH Key
Error Code
Error Number
L :Emitter
D :Receiver