- 43 -
9.2
Download (Copy F39-MC data to Sensor)
WARNING
After the changing the setting of the sensor, a start-up check must
be conducted. Normal operation can only be allowed after safety is
confirmed.
A change of the setting can only be done under observance of laws/
standards which are related to safe operation of the product.
Copy the setting data of one sensor stored in the bank of F39-MC to
another sensor.
<Note>
1.
Banks will be allocated independently to sensor models
(F3SN/F3SH/F3ZN). Copying to sensor with different model is not
possible. For example, copying from F3SN to F3ZN is not possible.
2. Copying to sensor with different detection capability (or beam gap) is
not possible.
3. Please do not drop a power supply on the "bk 1" display after
pushing the [ENTER] key before being displayed as "Good." When a
power supply should be dropped, a sensor may not carry out normal
operation.
Download
Download
Setting completed
Error
Select bank number using
[UP][DOWN] keys.
Note: F3SN/F3SH has only
Bank1
Blinking
[Cancel] Key
[Enter] Key
①
②
2.D.LD
BK 1:Bank #1
GOOD
ERR
Go to
①
after 1 sec.
③
- 44 -
9.3
Bank Lock (Prohibit overwriting to bank data)
To prohibit overwriting to a bank that has been stored with the setting
data of the sensor, select this function by following means;
Select <3.b.Lc>, then press [ENTER] key to enter Bank lock mode.
Select the bank with [UP][DOWN] keys and set to either prohibit writing
<Loc> or permit writing <FrEE> with [ENTER] key.
Bank lock
Bank lock
Bank lock
Bank lock
Blinking
[Cancel] Key
[Enter] Key
[Up][Down] Key
LOC:Overwrite
disabled
FREE:Overwrite
enabled
3.B.LC
①
②－１
BK 1:Bank #1
BK 2:Bank #2
②－２
Selectable from BK2 to BK9
(Only F3ZN)
④－１
Setting completed
GOOD
Go to ②
after 1 sec
③－１
<Note>
The Locked bank cannot be selected when uploading the setting data.
(The bank is not displayed.)
