Omron E5ZN-DRT, Operation Manual

Page: 92 / 162

77
Operations from the Edit Device Parameters Window Section 5-2
4. From the Edit Device Parameters Window, select the General Tab, and
click the Download Button to write all the parameters copied from the Tem-
perature Controller.
5-2-8 Sending Operation Commands to the Temperature Controllers
The Configurator can be used to send operation commands to each of the
Temperature Controllers through the DeviceNet Communications Unit.
The following operation commands can be executed from the Configurator.
• RUN/STOP
• Move to protect level
• AT execute/cancel
• Auto/manual
• Write mode
• Alarm latch cancel
Operating Method
1,2,3... 1. Open the Edit Device Parameters Window for the DeviceNet Communica-
tions Unit, select the General Tab, and click the Operation Button for the
Temperature Controller unit number in the Unit Configuration field.
2. The window for sending operation commands to the specified Temperature
Controller will be displayed.
3. Select the Tab Page for the channel that will be sent the command, and
click the button of the operation to be executed.