Omron E5ZN-DRT, Operation Manual

Page: 43 / 162

28
Installation Section 3-2
Mounting the Unit
Pull down the DIN Track mounting hook on the bottom of the Unit (1), latch the
top hook on the back of the Unit onto the track (2), push the Terminal Unit until
the hook can be locked onto the track (3), and then push the DIN Track mount-
ing hook back up to lock the Unit in place (4).
Removing the Unit
Use a flat-blade screwdriver to pull down the DIN Track mounting hook, and
then pull out the bottom of the Terminal Unit.
Mounting End Plates
Always mount end plates to both ends to keep the Terminal Units connected
together.
Hook the bottom of the end plate onto the DIN Track (1), hook the top, and
then pull down (2). Secure the end plate screws.
Note Always use two End Plates to clamp the Units together from both ends.
2
3
1
4
E5ZN
UNIT
BPS
POWER
ERROR
SD/RD
OUT1
OUT2
SUB1
SUB2
E5ZN
UNIT
BPS
POWER
ERROR
SD/RD
OUT1
OUT2
SUB1
SUB2
E5ZN
(1)
(2)