Omron CVM1-CLK21, Operation Manual

Page: 58 / 309

42
Installation Section 3-2
3-2-3 CS-series PCs
Up to a total of four Controller Link Units (wired, optical, and optical ring) for
CS-series PCs can be installed in a CPU Backplane or a CS Expansion Rack.
Controller Link Units cannot be installed on an C200H Expansion I/O Rack or
a SYSMAC BUS Slave Rack.
Note Tighten the screws on the Backplane to a torque of 0.9 N • m.
Tighten the fixed screws on the CPU Unit to a torque of 0.4 N • m.
Note When installing several CS-series CPU Bus Units at the same time, a total of
16 CS-series CPU Bus Units maximum may be installed.
CPU Rack
The Unit can be mounted to the 2/3/5/8/10
slots shown in the diagram on the right.
Install in four of
these slots.
CPU Backplane
CS1W-BC103, CS1W-BC083, CS1W-BC053, CS1W-BC033, CS1W-BC023
2/3/5/8/10 slots
CS Expansion Backplane
CS Expansion Backplane
Slots 3/5/8/10 shown in the illustration can be
used.
C200H Expansion I/O Backplane
Controller Link Units cannot be mounted to
Expansion I/O slots.
3/5/8/10 slots
PS: Power Supply Unit
CPU: CPU Unit
CS1W-BI108, CS1W-BI083, CS1W-BI053, CS1W-BI033
C200H Expansion I/O Backplane