Omron CVM1-CLK21, Operation Manual

Page: 183 / 309

167
Commands and Responses for C200HX/HG/HE and CQM1H-series PCs Section 6-6
6-6-16 FORCED SET/RESET CANCEL
Cancels the forced status of all bits/flags that have been forced ON or forced
OFF. (“Forced status” is the ON/OFF status of bits/flags which has been forc-
ibly retained as write protected.)
Command Block
Response Block
Note The bits (flags) in the following memory areas can be force-set or force-reset.
6-6-17 MULTIPLE FORCED STATUS READ
Reads the forced status of the specified range of words or timers/counters.
Command Block
Response Block
Parameters Memory area code, Beginning address, Number of units (command,
response): Specify the memory area code, the beginning address in that
area, and the number of words or timers/counters to read. The number of
units can be set from 0001 to 0040 (Hex) (1 to 64 in decimal). The total of 64
continuous bits (for 4 words) for the number of bits or words and the total of 64
units (for 32 words) for the timers/counters can be read at one time.
The actual area, beginning address, and number of units read will be returned
in the response.
Command
code
23 02
Command
code
23 02
Response
code
Memory area Data
IR, SR, LR, HR, and AR
areas Bit status
Timer/Counter Completion Flag status
Command
code
23 0A
Beginning
address
Memory
area code
Number of
units
Command
code
23 0A
Response
code
Beginning
address
Memory
area code
Data Number of
units