Omron CVM1-CLK21, Operation Manual

Page: 197 / 309

181
Remote Programming and Monitoring Section 7-2
Units that are different to the one to which the Programming Device is con-
nected.
7-2-2 Remote Controller Link Networks
SYSMAC Support Software or CV Support Software
A Programming Device connected to a CVM1 or CV-series CPU Unit can pro-
gram and monitor a CVM1 or CV-series PC on another Controller Link Net-
work through a CVM1 or CV-series PC. Other types of PC cannot be
programmed or monitored on remote networks.
CX-Programmer
A CX-Programmer connected to a CS/CJ-series, C200HX/HG/HE, CVM1,
CV-series, or CQM1H-series CPU Unit can program and monitor any other
PC on another Controller Link Network. Other types of PC, different to the one
to which the CX-Programmer is connected can also be programmed or moni-
tored on remote networks.
CX-Programmer
Programming Device
Programming
and monitoring
Note Remote programming and monitoring are possible from a factory automation
node computer using the CX-Programmer.
Controller Link Network
CS/CJ-series,
C200HX/HG/HE,
CVM1, CV-series,
or CQM1H PC CS/CJ-series,
C200HX/HG/HE,
CVM1, CV-series,
or CQM1H PC
Controller Link Network
Programming
and monitoring
CS/CJ-series PC
Controller Link Network Controller Link Network
SYSMAC Support
Software (CVM1 Only)
or
CV Support Software
Programming Device
Note Remote programming and monitoring is not possible from computer nodes. Computer
nodes can only monitor Controller Link Network status. A Programming Device connected
to a C200HX/HG/HE PC cannot remotely program or monitor a node on a remote network.
Controller Link Network Controller Link Network
Programming
and monitoring
CVM1 or
CV-series PC
Controller Link
Support Software
CS/CJ-series, CVM1,
or CV-series PC
CVM1 or
CV-series PC
CS/CJ-series, CVM1,
or CV-series PC