Omron CVM1-CLK21, Operation Manual

Page: 149 / 309

133
Using the Message Service Section 6-3
C200HX/HG/HE PCs
CVM1, and CV-series PCs
CQM1H-series PCs
Network Status
The nodes on the network are shown in the following illustrations.
C200HX/HG/HE PCs
CS/CJ-series, CVM1, and
CV-series PCs
CQM1H-series PCs
Name Operating
level
Address Contents
Network Instruction
Enabled Flag 1 SR 25204 0: Execution not possible (already
executing)
1: Execution possible (not executing)
0 SR 25201
Network Instruction
Error Flag 1 SR 25203 0: Normal end
1: Abnormal end
0 SR 25200
Name Address Contents
Word Bit
Network
Instruction
Enabled Flag A502 Port number corresponds
to bit number, i.e., port 0:
bit 00, port 1: bit 01, etc. 0: Execution not enabled (executing)
1: Execution enabled (not executing)
Network
Instruction
Error Flag A502 Port number corresponds
to bit number plus 8, i.e.,
port 0: bit 08, port 1: bit 09,
etc. 0: Normal end
1: Abnormal end
Name Address Contents
Network Instruction
Enabled Flag AR 0209 0: Execution not possible (already executing)
1: Execution possible (not executing)
Network Instruction
Error Flag AR 0208 0: Normal end
1: Abnormal end
Operating level 0
AR 08
AR 09 Operating level 1
AR 12
AR 13
The numbers in the squares indicate node addresses.
The corresponding node participation status is as follows:
0: Not part of network
1: Part of network
The numbers in the squares indicate node addresses.
The corresponding node participation status is as follows:
0: Not part of the network
1: Part of the network
N: Unit number
CIO 1500 + 25 x N + 2
CIO 1500 + 25 x N + 3
IR 192
IR 193
The numbers in the squares indicate node addresses.
The corresponding node participation status is as follows:
0: Not part of network
1: Part of network