34##.-0)*'")<
Section 6-5
$*-
In order to use Counter 1 for Rate Measurement its Time-Window has been set to
1 second (=1000 ms). Rate Range 0 is used to detect frequencies that are above
the critical speed and Rate Range 1 used to detect frequencies that are below the
critical speed:
DM-configuration
The Machine Number of the High-speed Counter Unit is 0. The High-speed Coun-
ter is allocated 40 CIO-words starting from CIO 2000 (n = CIO 2000 + 0 x 10) and
400 DM-words starting from D 20000 (m = D 20000 + 0 x 100). To configure the
Unit the following DM-settings must be made.
5000 H z
Critical speed
Irregularity passes saw blade
Conveyor Speed:
Fast Slow
Conveyor Speed:
Slow Fast
Speed
Saw Blade [ Hz]
Conveyor
Speed
Slow
(O0 and O1 are ON )
Fast
(O0 and O1 are OFF )
Time
Time
High frequencies are
detected by Rate Range 0
Low frequencies are
detected by Rate Range 1
Rate Range Data
Rate Range Lower Rate Range
Limit
Upper Rate Range
Limit
Outputs ON
0
5000
2,147,483,647
0, 1 (OFF)
1
0
4999
0, 1 (ON)
W902-E2-03.book Seite 170 Donnerstag, 7. Oktober 2004 2:06 14
Summary of Contents for CS1W-CT021
