F"")"-$).#+
Section 5-2
$')
5-2-2
IOWR/IORD-instruction errors
IOWR/IORD-instruction errors are detected by the Unit after they have been
issued from the ladder program to the High-speed Counter Unit. IOWR-instruc-
tions are used to change Counter settings of the Unit. In case you specify faulty
operands in the IOWR-instruction the Unit reports this as an error. IORD-instruc-
tions only generate an error in case an invalid Control Code or an invalid number
of words is specified.
Error Code 1
Error Code 2
Error
Description
0350
Invalid Control Code Invalid Control Code
The Control Code that is specified in the
IOWR/IORD-instruction is not supported by the
High-speed Counter Unit. The
Invalid Control
Code
is reported in Error Code 2.
0360
Control Code
Invalid number of
words
The number of words that is specified in the
IOWR/IORD-instruction is faulty. The
Control
Code
of the instruction for which the invalid
number of words is specified is reported in
Error Code 2.
0400
Counter
No.
000
Z-Reset Mode Out of
Range
Two problems can cause this error. The Z-
Reset Mode that you specified is not in the
valid range (0-1). It is also possible that you
issued an IOWR-instruction to change the
Maximum or Minimum Count Value of a
Circular or Linear Counter, causing one or
more of the already defined Range Limits or
Comparison Values to be outside the new
Counting Range.
Counter No.
indicates the
number of the Counter.
0412
Counter
No.
000
Invalid Counting
Range
The Lower Count Limit of the Linear Counter is
not a negative value and/or the Upper Count
Limit is not a positive value.
0413
Counter
No.
000
Invalid Current
Counter Value
The Counter Value issued with the IOWR-
instruction is outside the counting range of the
Counter.
Counter No.
indicates the number of
the Counter.
0420
Counter
No.
000
Invalid
Rate Range Limits
Upper Rate Range Limit
≤
Lower Rate Range
Limit.
Counter No.
indicates the Counter
number.
0420
Counter
No.
Range
No.
Invalid
Range Limits
Upper Range Limit < Lower Range Limit.
Counter No.
indicates the Linear Counter
number and
Range No.
indicates the Range
number.
W902-E2-03.book Seite 146 Donnerstag, 7. Oktober 2004 2:06 14
Summary of Contents for CS1W-CT021
