9#+#'-3(2*%<+
Section 3-6
+-
Software Reset Enable Bit
as Reset Enable Source
Resetting the Counter Value to zero by Digital Input or Z-Signal must be enabled.
Enabling can be done by setting the Software Reset Enable Bit in CIO for the cor-
responding Counter to 1.
Digital Input as Reset
Enable Source
In order to use a Digital Input as Reset Enable Source you must assign Function
15 or 16 (= Enable/Disable Reset) to the corresponding Digital Input. Refer to 3-4
for more information.
CNT1:
CNT2:
CNT3:
CNT4:
n+2
n+5
n+8
n+11
Software Reset Enable Bit:
0 = Resetting by Digital Input or Z-Signal Disabled
1 = Resetting by Digital Input or Z-Signal Enabled
15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
W902-E2-03.book Seite 80 Donnerstag, 7. Oktober 2004 2:06 14
Summary of Contents for CS1W-CT021
