![background image](http://html1.mh-extra.com/html/omega/uwbt-series/uwbt-series_user-manual_4162735070.webp)
Section 5 - Software Instructions (Android)
5.1 Pairing
Initial Pairing Instructions
In order to start communicating with the UWBT transmitter, you need to pair
it with your smart device via Bluetooth wireless. Android devices only require
pairing from within the UWBT app.
A smart device cannot pair with the UWBT transmitter if there
are multiple transmitters of the same name are discoverable. For
example, if there are two transmitters named “Chemistry Lab”
switched on, your smart device will not be able to pair with either
one. You must first change the name of one transmitter in order
to pair properly.
5.1.1 Pairing within the UWBT app.
Follow the directions below to pair:
1. Make sure your UWBT transmitter is switched on.
2. Open the UWBT app.
3. In the UWBT app, go to the “Transmitter Pairing” settings
4. Hold down the transmitter’s “Pair” button for 2 seconds, – this will put the sensor in
discovery mode.
5. Click on the "Discover Transmitter" button
Figure 5-1. UWBT App As It Discovers Devices
6. In the “Discovered Transmitter” list, select the transmitter you would like to pair with.
5-1
Software Instructions (Android)
5
NOTE: