If you do not have an RTD temperature sensor connected on your
UWBT-PH unit, the alarms for temperature will be greyed out.
Alarm Setting For RH
You can swap the button for RH or temperature depending on your preference
of the Alarm condition on the live data graph.
Alarm Sound
There are 5 different types of alarm tones. Once you drop down the menu to
select the particular sound, a two-second sample tone will be played.
When an alarm sound is enabled, the siren will sound for 5
seconds after entering the alarm condition. After the 5 seconds,
the sound will stop, but the reading value will stay in the
designated color (blue for low alarm, red for high alarm) as long
as it is in the alarm condition.
Figure 4-41. Alarm Sound Options
High Temperature Alarm Value
You can set this alarm value to the highest value of the particular sensor by
using custom key board entry. For example, you can set up to 2300°F for K-type
thermocouple.
If you type in an alarm value that exceeds the limit of your sensor, the UWBT
app will automatically set your high alarm to the highest possible value for that
sensor.
Software Instructions (iOS)
4
4-32
NOTE:
NOTE:
