DMTA-10004-01EN, Rev. D, November 2016
Using the Datalogger
185
Figure 11
‑
16 Opening a file
11.3.2
Copying a File
You can duplicate a file that already exists in the datalogger. The file copy function is
useful when you need to create a new file with the exact same ID number structure as
a previously created file. You can also choose to copy the thickness data.
The file copy only allows you to copy an existing file in the internal memory to the
internal memory. Use the file import and export functions to copy data between the
internal memory and the external microSD card.
To copy a file
1.
From the measurement screen, press
[FILE]
.
2.
In the menu, select
COPY
.
3.
In the
COPY
screen (see Figure 11-17 on page 186):
a)
In the list, select the source file.
b)
In
COPY NAME
, enter the file name for the destination file.
c)
Set
COPY THICKNESS DATA
to
YES
when you want to also copy the
thickness readings from the original file into the new file.
d)
Select
COPY
.
Summary of Contents for 38DL PLUS
