DMTA-10004-01EN, Rev. D, November 2016
Chapter 8
124
8.5
Locking the Instrument
The 38DL PLUS offers an instrument lock allowing a supervisor to restrict access to
selected functions. The supervisor can also enter a password to prevent other users
from unlocking the functions. Once a password has been set, you must reenter the
password before you can lock or unlock any function.
You can lock the following functions:
•
Calibration with
[CAL VEL]
and
[CAL ZERO]
(
[2nd F]
,
[CAL ZERO] (Do ZERO)
still available)
•
Setup menus accessed with
[SETUP MENU]
and
[SP MENU]
•
Transducer setup recall with
[XDCR RECALL]
•
Datalogger operations (except
[SAVE/SEND]
)
•
Gain adjustment with
[GAIN]
•
Waveform adjustment with
[WAVE ADJ]
Locking the calibration prevents changes to calibration values so that no parameters
can affect the value of the measurement; these include material velocity and test block
zero calibration. However, you can still view these values, use the measurement
screen, and use the datalogger functions.
Anytime a user attempts to use a locked function, a message appears in the help bar to
indicate that the function is locked (see Figure 8-8 on page 124).
Figure 8
‑
8 Example of a locked function message in the help bar
To set the password
1.
From the measurement screen, press
[SETUP MENU]
.
2.
In the menu, select
PASSWORD SET
.
3.
In the
PASSWORD SET
screen, in
INSTRUMENT PASSWORD
, enter your
password using up to eight alphanumeric characters.
Summary of Contents for 38DL PLUS
