Olympus 38DL PLUS User Manual Download Page 217

Page: 217 / 318

DMTA-10004-01EN, Rev. D, November 2016

Using the Datalogger

205

Press

[2nd F], [



]

[2nd F]

[



]

to move between the

#MINS

and

#MAXS

lists.

Select

CANCEL

to return to the measurement screen or

NEW REPORT

generate another report.

In the

FILE COMPARISON

screen (see Figure 11-33 on page 205):

In the upper list, select the reference file that you want to use in the
comparison.

In the lower list, select the comparison file (containing newer data for the
same measurement points).

Select

REPORT

The

FILE COMPARISON

report result screen opens with the first maximum

wall loss ID highlighted (see Figure 11-34 on page 206).

Figure 11

‑

33 The FILE COMPARISON report screen

Summary of Contents for 38DL PLUS































































































































































































































































































































Search results

Summary of Contents for 38DL PLUS

Reviews:

Related manuals for 38DL PLUS

Brands by name

Popular brands

Olympus 38DL PLUS, User Manual

Search results

Summary of Contents for 38DL PLUS

Reviews:

Related manuals for 38DL PLUS

Brands by name

Popular brands