DMTA-10004-01EN, Rev. D, November 2016
Software User Interface Elements
47
To edit an alphanumeric parameter value using the traditional method
1.
Select an alphanumeric parameter.
2.
Use the
[
]
and
[
]
keys to select the character that you wish to enter. Hold down
the key to quickly cycle through the letters, numbers, and special characters.
3.
Use the
[
]
keys to move to the next character.
4.
Repeat the steps 2 and 3 to enter other characters.
5.
If you need to move the position of the cursor in the value text box, use the
[
]
or
[
]
key.
6.
To insert a character at the cursor position, press
[CAL ZERO]
.
The character at the cursor and all those to the right moves one position to the
right, making a space for a new character.
7.
To delete the character at the cursor position, press
[CAL VEL]
.
The character at the cursor is deleted and any characters to the right move to the
left by one position.
8.
Press
[ENTER]
to accept the character string and move to the next parameter.
Summary of Contents for 38DL PLUS
