DMTA-10004-01EN, Rev. D, November 2016
Using Advanced Gaging Features
145
3.
In the menu, select
ALARM
.
4.
In the
ALARM
screen:
a)
Set
ALARM ENABLE
to
ON
.
b)
Set
ALARM MODE
to
B
‑
SCAN
.
c)
Enter the desired
LOW ALARM
and
HIGH ALARM
values.
5.
Press
[MEAS]
to return to the measurement screen.
6.
The horizontal red alarm lines appear on the B-scan (see Figure 8-5 on page 121).
10.3.3
Saving B-Scans, A-Scans, or Thickness Readings
The 38DL PLUS can do the following tasks while using the B-scan:
•
Save a live thickness reading while the B-scan is running.
•
Save any reviewed thickness reading on a frozen B-scan.
•
Save all thickness readings for one B-scan screen (600 readings) along with the
minimum or maximum thickness readings for a held B-scan.
•
Save all thickness readings for one B-scan screen (600 readings), the minimum or
maximum thickness reading and waveform for a held B-scan.
•
Save an entire B-scan history up to 10000 thickness readings, the minimum or
maximum thickness readings and waveform, and the held B-scan.
To save a live thickness reading while the B-scan is running
Press
[SAVE/SEND]
.
To save any reviewed thickness reading on a frozen B-scan
1.
While the B-scan is running, press
[FREEZE]
to enter the review mode.
2.
Use the
[
]
and
[
]
keys to review any thickness on the frozen B-scan.
3.
Press
[SAVE/SEND]
to save to the datalogger, the thickness value for the review
marker position.
To save the minimum or maximum thickness reading for a frozen B-scan
1.
Set
B
‑
SCAN FREEZE MODE
to
SHOW MINIMUM
or
SHOW MAXIMUM
.
The gage displays the minimum or maximum thickness reading with the
corresponding waveform.
2.
While the B-scan is running, press
[FREEZE]
to enter the review mode.
Summary of Contents for 38DL PLUS
