Olympus 38DL PLUS User Manual Download Page 63

Page: 63 / 318

DMTA-10004-01EN, Rev. D, November 2016

Initial Setup

To set the clock

Press

[2nd F]

[SETUP MENU] (SP MENU)

In the menu, select

CLOCK

In the

CLOCK

screen (see Figure 4-2 on page 51):

Set parameters to the current date and time and to the desired date and hour
modes.

Select

SET

Figure 4

‑

2 Selecting clock parameters

4.4

Changing Display Settings

You can change the appearance of some display elements such as colors, brightness,
waveform rectification, and waveform trace.

To change the display setting

From the measurement screen, press

[DISPLAY]

In the

DISPLAY SETTINGS

screen (see Figure 4-3 on page 52), select the desired

parameter and value for the following parameters:
—

COLOR SCHEME

to either select the

INDOOR

OUTDOOR

optimized

visibility (see “Color Schemes” on page 52 for details).

Summary of Contents for 38DL PLUS































































































































































































































































































































Search results

Summary of Contents for 38DL PLUS

Reviews:

Related manuals for 38DL PLUS

Brands by name

Popular brands

Olympus 38DL PLUS, User Manual

Search results

Summary of Contents for 38DL PLUS

Reviews:

Related manuals for 38DL PLUS

Brands by name

Popular brands