DMTA-10004-01EN, Rev. D, November 2016
Chapter 7
102
Figure 7
‑
8 Multi
‑
measurement display modes with three layers and the sum
e)
Set
SAVE/SEND KEY
to one of the following options to determine the
operation when you press
[SAVE/SEND]
:
○
ACTIVE
: Saves only the active measurement (the highlighted thickness)
to the datalogger.
○
AUTO
‑
INCR ACTIVE
: Saves the active measurement to the datalogger,
and then changes the active setup to the next setup in the
multi-measurement list. This option allows you to easily save all
multilayer measurement by repeatedly pressing
[SAVE/SEND]
.
f)
For
SETUP 1
,
SETUP 2
,
SETUP 3
, and
SETUP 4
, select the custom setups that
you created in step 1 for each of the layers. Selecting
NONE
shows no
thickness at the location.
g)
When
SUM MODE
is set to
ON
, in
SUMMATION
, select the setups for
which you want to sum the thickness measurements.
h)
Press
[MEAS]
to return to the measurement screen with the
multi-measurement function active in the normal mode.
7.4.3
Using the Multi-Measurement with the Soft Contact Mode
Before you can use the multi-measurement function, you must create and save custom
setups for the sagittal height and the lens thickness measurement. The 38DL PLUS
calculates the radius of curvature using the sagittal height value and the diameter of
the pedestal that you enter.
Large font
Waveform
Summary of Contents for 38DL PLUS
