Olivetti OFX 1000, Instruction Manual

Page: 64 / 125

DIALLING 65
10.
Confirm the EDIT ANOTHER option by pressing START so that
you may also enter a phone number for the same code. The
display will show the original message.
IF...
•
you do not wish to memorise a telephone number, press
STOP.
11.
Repeat step 4 and enter the code 01 again. At step 5, after
pressing START, select the TEL NO. option and confirm by
pressing START.
At step 6, enter the phone number 124456 and confirm by
pressing START. As there is no need to repeat the next steps,
you may terminate the programming procedure at this point by
pressing STOP.
You have now programmed under the code 01 all the
information in the table, including the fax and telephone number.
IF...
•
you do not wish to memorise the telephone number, press
STOP.
•
you want to make sure that all the information has been
entered correctly, you can repeat the procedure and check it
on the display.
•
you want to change any of the information stored, repeat the
procedure and overwrite with the new information.
TYPE SPEED NO.
(01-32):
AUTOMATIC RX
21-02-95 10:30