Olivetti d-Color MF552 Fax Manual Download Page 44

Page: 44 / 203

Option settings for Fax TX

3-24

d-Color MF552/452/362/282/222

3.6

Scanning a number of originals in several batches ([Separate Scan])

If the number of original sheets is so large that they cannot be loaded into the

ADF

at the same time, you can

load them in several batches and handle them as one job.

In [Separate Scan], you can switch between

ADF

and

Original Glass

to scan the originals.

Load the original.

NOTICE

Do not load more than 100 sheets at a time into the original tray, and do not load the sheets up to the
point where the top of the stack is higher than the

mark. Doing so may cause an original paper jam,

damage the originals, and/or cause an

ADF

failure.

Tap [Application] - [No. of Originals] - [Separate Scan], and set to [ON].

Press the

Start

key.

The original is scanned.

Load the next original, then press the

Start

key.

Press [Change Setting] to change the option settings according to the new original as necessary.

Summary of Contents for d-Color MF552












































































































































































































Search results

Summary of Contents for d-Color MF552

Reviews:

Related manuals for d-Color MF552

Brands by name

Popular brands

Olivetti d-Color MF552, Fax Manual

Search results

Summary of Contents for d-Color MF552

Reviews:

Related manuals for d-Color MF552

Brands by name

Popular brands