Olivetti d-Color MF552, Fax Manual

Page: 182 / 203

11
11-24 d-Color MF552/452/362/282/222
[Individual Sender Line Setup]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Individual Sender Line Set-
up]
Select whether to use different sender names for the respective lines if two lines are operating.
[OFF] is specified by default.
[Function Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings]
Configure the settings for using various fax transmission and reception functions.
[Function ON/OFF Setting]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
Enable or disable fax transmission and reception functions, such as Confirm Address that prevents wrong
fax transmission, F-Code TX, and Relay RX.
Settings Description
[Function ON/OFF Setting] Enable or disable fax transmission and reception functions, such as Con-
firm Address that prevents wrong fax transmission, F-Code TX, and Relay
RX.
For details on settings, refer to page 11-24.
[Memory RX Setting] Configure the settings for using the Memory RX function.
For details on settings, refer to page 11-26.
[Closed Network RX] Configure the settings for using the Closed Network RX function.
For details on settings, refer to page 11-26.
[Forward TX Setting] Configure the settings for using the Forward TX function.
For details on settings, refer to page 11-26.
[Incomplete TX Hold] Configure the settings for using the Fax Retransmit function.
For details on settings, refer to page 11-27.
[PC-Fax Permission Set-
ting] Select whether to allow PC-Fax TX using the fax driver.
For details on settings, refer to page 11-27.
[PC-Fax RX Setting] Configure the settings for using the PC-Fax RX function.
For details on settings, refer to page 11-27.
[TSI User Box Setting] Configure the settings for using the TSI Routing function.
For details on settings, refer to page 11-27.
Settings Description
[F-Code TX] Select whether to use the F-Code TX function.
F-Code TX is a function that sends documents to a destination by entering
a SUB address and a sender ID (communication password) of a specific
user box. The remote machine must support the F-Code TX/RX.
For details on settings, refer to page 11-25.
[Relay RX] Select whether to use this machine as a fax relaying station.
If this machine is used as a relaying station, it is possible to receive a fax
from a remote machine and automatically relay it to multiple programmed
destinations.
For details on settings, refer to page 11-25.
[Relay Printing] Select whether to distribute and print a received fax when this machine is
used as a fax relaying station.
For details on settings, refer to page 11-25.
[Destination Check Display
Function] Select whether to show a list of specified destinations before sending a fax.
For details on settings, refer to page 11-25.
[Confirm Address (TX)] Select whether to require the user to enter a fax number twice to send a
fax by directly entering the fax number.
For details on settings, refer to page 11-25.