4. Make sure that the Inteface plate is placed properly on the chip and in level with the drawer. Align the notched corner
of the chip to the notch on the drawer and face the barcoded edges of the chip and interface plate forward
.
NOTE:
Make sure that the protective film has been removed.
Barcodes on
interface plate
and Chip
Notched corner in
chip and drawer
5. Tap
Close Drawer
. The system scans the chip barcode, then closes the drawer.
6. On the
Add run details
screen, confirm the Chip ID, then enter any of the following details for the run:
–
Run Name (the default name is the Chip ID). Max number of characters is 100.
–
Run Notes
NOTE:
If you need to eject the chip, tap
(Eject) on the Add run details screen. The software returns to the
Insert the chip containing samples, primers and, control reagents into the instrument screen.
39