You can either abort the run and shut down or wait until the run is complete before trying to power down the system
again
3. Wait 10 sec. The screen goes dark, and the power button becomes red.
IMPORTANT:
Wait at least 15 sec after shutting down the instrument before turning it back on.
5.5 Start Up the System
When the power button on the front of the instrument is red, gently press it to start up the system.
During startup, the instrument initializes all system components and software. It also performs a set of instrument checks
to ensure that the system components are working correctly. Initialization and the instrument checks take approximately
10 min to complete. Export the results from the Instrument Check screen under Settings (see
for more information). The system can remain turned on when not in use.
NOTE:
If not planned to be used, e.g., for a week, turn off Olink
®
Signature Q100 to save power.
5.6 Shut Down and Turn Off the System
Shut down and turn off the system completely before unplugging it or moving it. It takes approximately 1 min for the
system to shut down.
IMPORTANT:
Do not toggle off the main power switch without first shutting down the system.
1. Shut down the system using the power button on the front of the instrument.
48
