4.2.1.2 Prepare the Target 48 or Target 96 chip on Olink Signature Q100
NOTE:
If you see the Lock icon, swipe it to unlock it.
1. If required, log into the Olink Signature Q100 instrument.
2. On the
Home
screen, select the format that matches the chip you are using:
–
Tap
Target 96
for the 96.96 chip.
–
Tap
Target 48
for the 48.48 chip.
NOTE:
For more information about the task displayed on the screen, tap
.
3. After you tap
Target 96
or
Target 48
, the drawer opens.
4. Place the chip containing control line fluid and the interface plate on the drawer. Align the notched corner of the chip
to the notch on the drawer and face the barcoded edges of the chip and interface plate forward.
NOTE:
Make sure that the protective film has been removed.
Barcodes on
interface plate
and Chip
Notched corner in
chip and drawer
5. Tap
Close Drawer
. The system scans the chip barcode, closes the drawer, and then displays the Ready to start chip
preparation screen.
27