EM1401 / EM1401 UT EMA Thickness Gauge. Operation Manual.
+7(812) 385-54-28
38
To fill the C-scan, the user installs the Device sensor in the required point and
presses the
button; the cursor coordinate increases by one increment and the
procedure repeats.
Open inspections
This item enables to open the previously saved inspection results. If necessary,
the user can repeat measurements for any point in the previously saved archive. The
previously saved archive selection window is shown in the Figure below:
Open inspections window
You can navigate through the menu items using the
,
buttons. To select
the appropriate menu item, press on the
button.
This window contains the following items:
Open
This item enables to select and open the previously saved archive.
Edit
This item enables to select and open the previously saved archive for
editing.